Guard Alpha
€30.00
Tax included
Livraison : 1 à 3 semaines
Caution: washers must be fitted between the fork and the disc guard.
Some fork models are equipped with lugs, you must put enough washers so that the plastic does not touch these lugs, otherwise there is a risk of breakage when tightening the wheel or a big shock.
8mm polycarbonate discguard, compatible with
- 15mm axle (requires a 5mm longer axle)
- or standard 9-10mm axle with spacer (included)
(axle and screw are not included)
GUARD_ALPHA
Data sheet
- Manufacturing
- France
- Material
- Polycarbonate 8mm
- Diameter
- 170 mm
- Mass
- 112gr
New
You might also like
Caution: washers must be fitted between the fork and the disc guard.
Some fork models are equipped with lugs, you must put enough washers so that the plastic does not touch these lugs, otherwise there is a risk of breakage when tightening the wheel or a big shock.
8mm polycarbonate discguard, compatible with
- 15mm axle (requires a 5mm longer axle)
- or standard 9-10mm axle with spacer (included)
(axle and screw are not included)